How to Run a Sub-5 Minute Mile
By Fergus Crawley, Founder and Coach at OMNIA
The quick answer
To run a sub-5 minute mile, you need to average 74.3 seconds per 400m lap, or 3:06 per km, over 1,609 metres. Most runners get there with one or two quality track sessions a week that focus on race pace, top-end speed and speed endurance. Test your mile every six to eight weeks, and once you can run 5:05 to 5:10 in training, try for sub-5 with even splits of roughly 74, 75, 75 and 74 seconds or faster.
The biggest mistake? Going out too fast on lap one. I should know. I’ve done it every single time.
Why is a sub-5 minute mile so hard?
On paper, a sub-5 mile sounds relatively straightforward. Four laps of a track, averaging just under 75 seconds each. Most of you reading this could probably go out and run a 75 second lap tomorrow.
BUT, being able to run at that pace and being able to sustain it are two VERY different things.
For context, my PB is 4:51. And one of my proudest achievements remains hitting a 500lb back squat and a sub-5 minute mile on the same day. That was also my first ever sub-5. My pacer, Doug, a man I trusted, took me out in a 64 second first lap.
The target was 74.
So, let’s just say my legs were tested, my lungs were tested, and so was our friendship.
I’ve run sub-5 enough times to know it is always hard, and that’s exactly why it’s such a rewarding milestone to hit.
What pace do you need for a sub-5 minute mile?
For a 4:59 mile, you need to hold the following:
Per km: 3:06 target pace
Per mile: 4:59 target pace
Per 400m lap: 74:3 second target pace
Per 100m: 18.6 second target pace
And remember: a mile is 1,609 metres, not 1,600. You start a mile behind the usual start line, and those extra 9 metres DO matter.
These are the numbers you’re training towards, not the ones you need to be able to hit right now.
What does a sub-5 minute mile require physiologically?
A mile is long enough to be mostly aerobic, but short enough that you still need to produce and hold a LOT of power. There are four pieces to the puzzle:
- Aerobic capacity, the engine. Roughly 75-85% of the energy for a mile comes from your aerobic system. A higher VO2 max lets you hold faster speeds.
- Anaerobic capacity, the extra power. This tops you up when the aerobic system can’t keep up. It’s essential, but limited, which is exactly why pacing matters.
- Running economy. How much energy you spend at a given speed. Better economy means running faster for the same effort.
- Speed endurance, the sustainability. Your ability to hold speed as fatigue sets in. One 75 second 400 is a very different animal to four of them back to back.
In short, a sub-5 mile needs aerobic fitness, anaerobic capacity, efficient movement and resistance to fatigue. Not simply the ability to run fast.
How should you train for a sub-5 minute mile?
Aim to get comfortable at 70-75 seconds per 400m, and build the speed and endurance to hold it, with one or two hard track sessions a week.
If you’re reading this, I’m going to safely assume you’ve already got a solid aerobic base. So, let’s focus on what to layer on top. This is where specificity comes in, and where track access becomes your best friend.
| Session type | What it builds | Reps | Recovery |
| Race pacing | Familiarity at 70-75 seconds per 400m | 400m | 90-120 seconds |
| Speed development | Top-end speed, quicker than 70 seconds per 400m | 200-500m | 3 minutes or more |
| Speed endurance | Holding race pace under fatigue | 800-1,600m | 3 minutes or more |
All three can REALLY hurt. Preparing for a best-effort mile will redefine your idea of a hard session. Some of the 1,200m reps I’ve done are as hard as any running I’ve ever done, and I missed the pacing in quite a few of them.
BUT, these are quality sessions, so more is not always better. One or two hard sessions a week, alongside consistency and patience, is what chips away at your mile time.
How often should you test your mile time?
Test at the start of your training block, then every six to eight weeks, depending on how far off the pace you are.
If you’re new to a full-send mile, I can almost guarantee you’ll get it wrong the first time and blow up spectacularly. That’s fine. It gives you valuable lessons and a baseline to work from.
Bear in mind that retesting mid-block, without a taper, will come with fatigue. My rule of thumb: a 5:05 to 5:10 mile in training is the green light for a sub-5 attempt.
Remember, you build a mile through informed repetitions, not by constantly running the full distance.
What are the most common sub-5 mile mistakes?
I can guarantee I’ve made every one of these more times than I can count.
- Believing grit alone will get you there. The ability is either there or it isn’t. Sometimes it’s there and you still get it wrong on the day, which is fine. But the fitness HAS to be there first.
- Doing too many hard sessions. These sessions carry a high recovery cost. Your weekly volume might not look crazy, so it’s tempting to add more. In practice, you’re writing cheques your body can’t cash.
- Thinking you need spikes. Switching to spikes brings a huge amount of musculoskeletal demand and adaptation. It’s worthwhile if you’re committing to the track long-term. If you just want the milestone, normal trainers are absolutely fine.
- Going out too fast. I have ALWAYS gone out way too quick on lap one. My brother Jamie is a metronome… apart from the time he paced me for a 500lb deadlift and mile inside 5 minutes and took me out far too quick. Is that why I failed? I guess we’ll never know. You cannot bank time.
- Easing off on lap three. Lap three will make or break your mile. Most athletes have more in the tank than they think. Do not ease off.
How do you know if you’re ready to run a sub-5 mile?
Two predictor workouts have always been the best indicators:
- My version: 4 x 400m at 75 seconds with 60 seconds’ rest. Rest 5 minutes. Then 4 x 400m at 70 seconds with 60 seconds’ rest.
- Jamie’s version: 10 x 400m at 70-74 seconds with 60 seconds’ rest.
Same idea, different personalities. I take comfort in feeling confident at the 70 second mark. Jamie has always been more metronomic. If you can nail either one, you’ve got the ability.
How should you pace a sub-5 minute mile?
Run even splits: 74, 75, 75, then 74 seconds or faster.
| Lap | Target | What to think about |
| 1 | 74 seconds | The magic number. You’ve done it countless times in training. Just do it again. |
| 2 | 75 seconds | Stay steady. Set your watch to 200m splits if it helps you stay calibrated. |
| 3 | 75 seconds | This will feel like a battle. Do NOT ease off. |
| 4 | 74 seconds or faster | Send it. |
Aim to pass 1,600m at around 4:57, then kick from 200m out for those final 9 metres. That’s where the grit, grind, “let’s go” mentality finally earns its place.
It helps then. It does not help on lap one.
So, do as I say, not as I do, eh?
Can you be strong and run a sub-5 minute mile?
Yes. A 500lb squat and a sub-5 mile on the same day prove you don’t have to choose between being strong and being fit. (Jamie and our coach Kieran did the same with a 500lb deadlift, before anyone accuses me of hogging the limelight.)
You can’t be world-class at both at the same time, but you can be bloody good at both. That’s the whole point of Omnia Performance.
If you want to test both ends of the spectrum in a single day, that’s exactly why we built Strength to Endure: a max deadlift at 9am, then a 6-hour run at 12:30pm around the East Fortune circuit.
Grab your spot at Strength to Endure
Frequently asked questions
What pace is a sub-5 minute mile?
A 4:59 mile is 74.3 seconds per 400m, 3:06 per km, or 18.6 seconds per 100m.
How long does it take to train for a sub-5 minute mile?
It depends on your starting point. Test every six to eight weeks, and once you run 5:05 to 5:10 in training, you’re ready to make an attempt.
What are the best workouts for a sub-5 minute mile?
400m reps at 70-75 seconds for race pace, 200-500m reps for speed, and 800-1,600m reps for speed endurance. One or two hard sessions a week is enough.
What splits should I run for a sub-5 mile?
Roughly 74, 75 and 75 seconds, then 74 or faster for lap four. Aim to pass 1,600m at around 4:57.
Do you need spikes to run a sub-5 minute mile?
No. Spikes add extra strain and need time to adapt to. Normal trainers are fine if your goal is simply to hit the milestone.
Is a sub-5 minute mile good?
Yes. It’s a respected milestone for amateur runners, and it takes a strong combination of aerobic fitness, speed and pacing discipline.
How far is a mile on a track?
1,609 metres. That’s four laps of a 400m track plus 9 metres, so a mile starts behind the usual 1,600m start line.
Can you be strong and run a sub-5 minute mile?
Yes. A 500lb squat and a sub-5 mile on the same day prove you don’t have to choose between being strong and being fit. (Jamie and our coach Kieran did the same with a 500lb deadlift, before anyone accuses me of hogging the limelight.)
You can’t be world-class at both at the same time, but you can be bloody good at both.
Want help getting there?
Everything in this post works. BUT, knowing what to do and doing it alongside a job, a life and a squat you’d quite like to keep are two very different things…
That’s where 1:1 coaching comes in.
Apply for OMNIA 1:1 coaching
Want to learn more about hybrid training? Grab our free Hybrid Training Guide.
How to Brace for Your Lifts
How To Nail Your Ironman Nutrition
The Metrics That Actually Matter